Minor adjustments
Last updated 2 min readTags:MixingAI Coaching
Understand the minor adjustments in your Sonalix report, when to try them, and how to judge whether each change improves your mix.
Minor adjustments are the lower-priority recommendations in your Sonalix mix report. Review them after the priority fixes. They address smaller problems or changes that may only make sense once a more significant issue has been resolved.
For example, a vocal that is difficult to hear may need attention before a slight harshness in the cymbals. Both deserve a listen, but the vocal balance is likely to make the greater difference.
What each adjustment tells you
Each recommendation contains four parts:
| Part | What it tells you |
|---|---|
| Issue | A short name for the problem. |
| Description | What may be wrong and how it affects the sound. |
| Suggested fix | A specific change to try, with settings where relevant. |
| What to listen for | The audible difference to check after the change. |
The settings give you a starting point. Judge the result by ear rather than assuming that a precise number must be correct for your track.
Example: slightly harsh cymbals
This is an illustrative recommendation, not a setting to apply to every mix.
Issue: Cymbals sound slightly harsh.
Description: The cymbals sound sharp in the louder sections and draw attention away from the rest of the mix.
Suggested fix: If you hear the same problem, try a 1 dB cut around 8 kHz on the overhead bus. Start with a Q of 1 and compare with the EQ bypassed.
What to listen for: The cymbals should sound less sharp without becoming dull. Check that the snare still has enough brightness, since the overheads may capture it too.
How to work through minor adjustments
- Address the priority fixes first. A larger change to balance, EQ or dynamics can alter the need for a smaller adjustment.
- Listen again before making another change. Check whether the described problem is still audible in the revised mix.
- Try one adjustment at a time. Compare the processed and bypassed sound at a similar listening level.
- Check the whole mix. A change that improves one element may weaken another. Listen in context, even if you use solo to locate the problem.
- Keep the change only if it helps. Reduce it, undo it or leave the recommendation aside if the result is worse or the problem is no longer present.
If a recommendation refers to an earlier fix, follow that order. For instance, reassess the kick after reducing the bass level; it may already be easier to hear.
Do you need to apply every adjustment?
No. Review each recommendation, but keep only the changes that improve the track and suit its intended sound. A lower-priority issue may be worth correcting, may disappear after another fix, or may be a deliberate production choice.
Use the report to decide what to check next. You do not need to complete every suggestion for the mix to be finished.