Skip to content

What is automatic double tracking?

Send feedback

Last updated 4 min readTags:Production TechniquesADT

Automatic double tracking (ADT) imitates a second take from one recording. Learn how it works, when to use it and what to listen for.

Automatic double tracking (ADT) is an audio effect that imitates a second performance from a single recording. It blends the original with a copy whose timing and pitch vary slightly. The result can make a vocal or instrument sound fuller without another take.

ADT is also called artificial double tracking. Both names refer to the same basic technique.

How does ADT work?

When a singer records the same line twice, the takes differ in timing, tuning and delivery. Those differences give double tracking its sound. ADT approximates some of them with a processed copy of the original.

The basic process has three parts:

  1. Create a copy of the recorded signal.
  2. Offset its timing slightly from the original.
  3. Vary that offset during playback, with small pitch changes as well.

In classic tape ADT, changes to tape speed affected timing and pitch together. Modern plugins may model that process or use other methods to create similar variations. The movement can be controlled manually or by modulation; it does not have to be random.[^1]

There is no single required delay setting. Abbey Road describes typical offsets of 8–12 milliseconds in its original system.[^2] Longer offsets can make the double more distinct, but may also produce an audible repeat. Listen to the part rather than treating a particular number as a guarantee.

Simply duplicating a track without changing it will make it louder, rather than create a convincing double.[^3]

What does ADT sound like?

At a low level, ADT can add subtle thickness. With a louder double or stronger modulation, you may hear a separate voice, pitch movement or a more obvious processed sound.

Stereo width depends on how the signals are panned. ADT can also work in mono; doubling and stereo widening are not the same thing.[^1]

ADT retains the phrasing and articulation of the source recording. It cannot reproduce all the differences in a fresh performance, and it does not create a new harmony part.

ADT, real doubles and fixed delays

Method What changes? What to expect
Recorded double The performer records another take. Differences in timing, pitch, tone and delivery.
ADT A processed copy varies in timing and pitch. A doubling effect from one take, with adjustable movement.
Fixed short delay A copy stays at the same timing offset. Thickness or stereo spread, but no changing timing relationship.

A fixed delay can be useful, but its interaction with the original can alter the tone through comb filtering. Some frequencies reinforce each other while others cancel. This is particularly worth checking when a stereo effect is summed to mono.[^4]

When should you use ADT?

Try ADT when a vocal needs more thickness, a backing part needs a denser sound, or a single guitar take needs some stereo spread.

Use less if the words become harder to follow, note attacks lose definition or the part sounds out of tune. On bass, check whether the low notes remain clear and steady. These are listening decisions, rather than rules about which instruments can take the effect.

If you want the sound of two distinct performances and can record another take, try that too. ADT is useful when you only have one take or prefer its particular sound.

A simple way to try ADT on a vocal

  1. Start with a subtle setting. Keep the original prominent and bring up the processed double gradually.
  2. Adjust the movement. Reduce the modulation if sustained notes wobble more than you want.
  3. Listen in the mix. Check that consonants remain clear and the vocal still holds its place among the instruments.
  4. Compare at a similar volume. Adjust the output so extra loudness does not dominate your judgement.
  5. Check in mono. Listen for a thinner, hollow or much quieter vocal. If this happens, reduce the effect level or change the timing settings, then check again.

Where did ADT come from?

Abbey Road engineer Ken Townsend developed ADT in 1966 for The Beatles. The original setup used a second tape machine with variable speed to produce a doubling effect without another vocal performance.[^5]

Today's ADT plugins bring that approach into a DAW. You can use them for a restrained double or an obvious effect; the useful setting is the one that suits the part.

[^1]: Waves / Abbey Road Reel ADT user guide, sections 1.3–1.5 and the quick-start guide. [^2]: Abbey Road: Inside Abbey Road, Artificial Double Tracking. [^3]: iZotope: Double Tracking, 2 Basic Vocal Doubling Techniques. [^4]: iZotope: Mono vs. Stereo in Audio Mixing, section on artificial widening with delay. [^5]: Waves: Behind Abbey Road Studios' ADT Effect.

    Type to search titles, headings and summaries.