Skip to content

Tonal balance summary

Send feedback

Last updated 4 min readTags:MixingTonal Balance

Understand Sonalix's tonal balance summary, what each result means, and how to check bass, midrange and treble before changing your mix.

The tonal balance summary describes the broad balance of bass, midrange and treble in your mix. Sonalix compares frequency regions and returns a headline, such as “Low-end is dominating the spectrum”, with a short explanation.

Use it to decide what to listen for first. The summary can flag a possible imbalance, but it cannot establish which instrument caused it or whether it needs changing.

What each result means

These headlines describe relationships between frequency bands. A band can stand out because it contains more energy, because another band contains less, or both.

Summary What to check
Heavy low-end buildup and mid-range congestion Both the sub-to-low-mid and low-mid-to-mid comparisons trigger a warning. Listen for bass that overwhelms the mix and difficulty hearing individual parts.
Low-end is dominating the spectrum Sub-bass is elevated relative to the low-mid band. Check whether the deepest bass obscures the kick or takes attention away from the rest of the arrangement.
Low-mid congestion is clouding the mix Low-mid energy is elevated relative to the midrange. Listen for overlapping bass, guitar, keyboard or vocal parts that are difficult to distinguish.
Presence region is overly aggressive Presence energy is elevated relative to the midrange. Check whether vocal consonants, instrument attacks or percussion sound uncomfortably sharp.
High-end is rolled off: mix sounds veiled The high band sits well below the presence band. Compare the treble with a suitable reference before deciding that the mix needs more brightness.
Mix is bright; high-end may become fatiguing High-band energy is elevated relative to the midrange. Listen for treble that draws too much attention, especially in cymbals, percussion and effects.
Overall tonal balance is controlled None of the summary’s imbalance checks has triggered. Continue listening for problems within individual bands and in particular sections.

Words such as “clouding” and “veiled” describe possible listening impressions. They are not separate measurements. “Clouding” means that parts may be difficult to distinguish; “veiled” means that the mix may sound short of treble detail.

How Sonalix chooses the headline

The summary compares average spectral levels across five broad regions: sub, low-mid, mid, presence and high. Differences between those regions determine which result appears.

The checks run in a fixed order. Sonalix returns the first matching result, so a low-end warning can appear even when a brightness check would also trigger. The headline does not list every possible issue or prove that the reported issue is the most audible one.

“Overall tonal balance is controlled” is the fallback when none of these checks matches. It does not certify the mix as finished or suitable for release.

The five-band energy readings show the broader numerical breakdown. The frequency response curve provides more detail within those regions.

What to do next

1. Check the result against a reference

Choose a track with a similar arrangement and intended sound. Compare at a similar perceived loudness, and listen to comparable sections, such as two full choruses.

A bass-heavy track can be appropriate for its style. A restrained treble can also be deliberate. Tonal balance depends on the music; a warning is a reason to investigate, rather than an instruction to make every mix follow the same curve.1

2. Find the source of the problem

If you hear the reported imbalance, return to the session. Check track and bus levels before reaching for EQ.

For a low-end warning, listen to the kick and bass together. For low-mid congestion, check which parts become difficult to hear when the arrangement fills out. For a sharp or bright mix, compare the vocal, percussion and effects with the rest of the track.

The summary analyses the combined mix. It cannot tell you which channel to change.

3. Make one change and compare

Try a level adjustment or a small EQ move on the source you identified. Compare with the original at a similar perceived loudness. Keep the change if it improves the balance without removing something the track needs.

If you have only the stereo file, assess any master EQ change across the whole arrangement. A treble cut that softens the cymbals may also dull the vocal.

Reanalyse after a worthwhile change, but judge the result by listening. A different headline does not, by itself, mean a better mix.

What the summary cannot tell you

Five broad averages cannot reliably identify a narrow resonance, a particular instrument or a problem confined to a brief passage. They also do not establish masking between specific parts.

Use the frequency curve to inspect the flagged region more closely, then listen to the relevant passage in your DAW. The summary gives you a place to begin; the session and your ears determine the adjustment.

Was this page helpful?

    Type to search titles, headings and summaries.