Skip to content

Primary Issue and Next Step

Send feedback

Last updated 4 min readTags:AnalysisAI Coaching

Understand the Primary Issue and Next Step in your Sonalix report, how they are chosen, and how to use them when revising your mix.

Primary Issue names the first problem Sonalix recommends you check. Next Step gives you a brief instruction on where to begin. Both appear in the report summary. The detailed recommendation is in Priority Fixes.

For example, the Primary Issue might identify a low-end balance problem. The Next Step might tell you to check the balance between kick and bass before making other tonal changes.

What is the difference?

Report field What it tells you
Primary Issue The issue named in the first priority fix.
Next Step A suggested first action based on the issue category.
Priority Fixes The fuller explanation and recommended adjustments.

The summary gives you a starting point. Read the corresponding priority fix before you change the mix; it contains the detail that the short label leaves out.

How Sonalix chooses them

Primary Issue

Sonalix takes the issue description from the first item in the AI-generated priority fixes. It makes minor formatting changes, such as removing trailing punctuation, then displays it in the summary.

Primary Issue therefore reflects the order of the priority fixes. It is not a separate measurement or an independent assessment of the mix.

Next Step

Sonalix matches the Primary Issue to a category and selects a predefined instruction. It does not generate a new, detailed prescription for this field.

The categories cover:

Category Area covered
Clipping Peak levels and clipping concerns.
Low end Bass balance and separation.
High end Treble balance, including brightness or dullness.
Midrange Congestion and masking in the middle frequencies.
Dynamics Compression and changes in level.
Stereo Stereo coherence and mono compatibility.
Loudness Level relative to the intended target.
General Issues that do not match another category.

If Sonalix cannot identify a specific category, the general instruction directs you to the top priority fix.

Because Next Step uses a category template, its wording may be broader than the problem described in your report. Use the detailed fix to decide which adjustment to test.

How to use the recommendation

  1. Read the Primary Issue and its priority fix. Note what the report identifies and which change it recommends.
  2. Listen for the problem. Check the relevant passage in your DAW, in the context of the full mix.
  3. Test one adjustment. Follow the recommendation as a starting point, then judge the result by ear.
  4. Compare at a similar playback level. Check whether the change improves the mix, rather than simply making it louder.
  5. Export and analyse again after a meaningful revision. Review the updated findings before working through the remaining fixes.

You do not need a new report after every small adjustment. Reanalyse when you have made enough of a change to warrant checking the mix again.

Example: a low-end balance issue

Suppose Primary Issue flags excess bass, and Next Step tells you to check kick and bass separation.

Start with a section where both instruments play. Listen to whether one dominates or obscures the other. A level adjustment may be enough. If it is not, test the more specific processing suggested in the priority fix.

Soloing the instruments can make an overlap easier to identify, but judge the result with the full mix playing. Avoid cutting a fixed frequency range merely because kick and bass often overlap there.

Once you are satisfied with the change, reassess the tonal balance. You may no longer want the same adjustments elsewhere in the mix.

Does the Primary Issue always need fixing first?

It is Sonalix's recommended starting point. Confirm that the finding matters in your mix before acting on it.

Some problems affect later decisions. For example, excessive bass may drive a mix-bus compressor harder than intended. A bass adjustment could then change both the tonal balance and the compressor's response.

That does not establish a universal order for mixing. The appropriate first action depends on the audible problem, the arrangement and your intended sound. If the summary instruction seems too broad, return to the detailed priority fix and test its recommendation.

Why might the Primary Issue change?

A new analysis may rank the remaining issues differently after you revise the mix. The previous problem may have improved, or your adjustment may have affected another part of the sound.

Check the new recommendation against what you hear. The aim is a better mix, rather than a report with no remaining suggestions.

Was this page helpful?

    Type to search titles, headings and summaries.