What is equalisation (EQ)?
Last updated 6 min readTags:MixingEQEqualizationFundamentals
Learn what equalisation does, how frequency, gain and Q work, and how to use EQ to shape tone and reduce masking in a mix.
Equalisation (EQ) changes the balance of frequencies in audio. You boost a range to make it more prominent, or cut it to make it less prominent. A bass control on a stereo is a simple example; a mixing EQ gives you more precise control.
In music production, EQ can reduce rumble, soften a harsh sound, brighten a vocal or make one instrument easier to hear beside another. It also serves creative purposes, such as the restricted sound of a telephone effect.
How EQ changes a sound
A recording contains a mixture of frequencies. Low frequencies contribute bass and weight; the midrange carries much of an instrument's body and definition; higher frequencies contribute brightness and detail. These descriptions overlap and vary with the sound.
EQ changes the relative level of those frequencies. For example, a broad cut around 300 Hz might make a guitar sound less thick. A high-frequency boost might make it brighter.
An ordinary clean, static EQ does not generate new harmonics as distortion does. It changes the balance of content already present. Some hardware EQs and analogue-modelled plugins also add saturation, so their effect can extend beyond the EQ curve.
The main EQ controls
A parametric EQ lets you choose the frequency, gain and width of an adjustment. Each independently adjustable section is called a band.[1]
| Control | What it changes | Example |
|---|---|---|
| Frequency | Where the adjustment acts, measured in hertz (Hz) or kilohertz (kHz) | Centre a bell band at 300 Hz |
| Gain | How much you boost or cut, measured in decibels (dB) | Set a cut of −2 dB |
| Q | How wide a bell band is | A higher Q affects a narrower range; a lower Q affects a broader range |
For bell bands, a narrow adjustment can target a ringing resonance. A broad adjustment changes more of the sound's overall tone. Exact Q values do not always produce identical curves in different plugins.[2]
Common EQ filter shapes
The filter shape determines how the adjustment extends around the selected frequency.[2]
| Shape | What it does | A possible use |
|---|---|---|
| Bell | Boosts or cuts a range around a centre frequency | Reduce a harsh area in a vocal |
| Low shelf | Boosts or cuts the low end, with a transition around the selected frequency | Reduce excessive bass weight |
| High shelf | Boosts or cuts the high end, with a transition around the selected frequency | Brighten a dull recording |
| High-pass, or low-cut | Reduces frequencies below a cutoff | Reduce low-frequency rumble |
| Low-pass, or high-cut | Reduces frequencies above a cutoff | Soften a bright synth |
| Notch | Makes a deep, narrow cut | Reduce a specific hum or ringing frequency |
High-pass and low-pass filters usually reduce frequencies progressively rather than remove everything immediately at the cutoff. Their slope, measured in dB per octave, describes how steeply they roll off. A 24 dB-per-octave slope is steeper than a 12 dB-per-octave slope.
How to use EQ in a mix
1. Describe what you hear
Start with an audible observation: “The vocal becomes hard to follow when the guitars enter” or “The bass is too boomy on certain notes.” You do not need to identify an exact frequency before you begin.
Check the track levels first. If a vocal is simply too quiet, a fader move may be sufficient. Panning, arrangement and the choice of sound can also matter more than EQ.
Frequency overlap is normal. Two instruments can share much of their frequency range and still sound clear together. Consider EQ when their balance causes an audible problem, or when you want to change their tone.
2. Try an adjustment
Choose a shape that suits the change you want. A bell cut might reduce a resonance; a shelf might soften an overly bright recording.
As an illustration, suppose a guitar masks the vocal's consonants. Try a broad cut of roughly 1–3 dB on the guitar somewhere in the 2–4 kHz region. Adjust the frequency and width while both tracks play. Those numbers are a starting point for this example, not a vocal-mixing prescription.
If the guitar loses too much definition, reduce the cut or try another approach. A vocal boost, guitar automation or a different arrangement may suit the song better.
Cuts and boosts are both valid. A cut reduces an excess; a boost emphasises something you want to hear. You do not have to exhaust every possible cut before boosting.[3]
3. Compare at similar loudness
Switch the EQ in and out while the mix plays. Adjust its output gain so the processed and bypassed versions sound roughly equally loud. Otherwise, a louder version can seem better even when the tonal change is unhelpful.
Listen for the intended improvement and any unwanted effects. Is the vocal easier to follow? Has the guitar become too dull? Check another section of the song before you keep the setting.
Solo can help you locate a resonance or hear a subtle change. Return to the full mix for the final judgement.
Parametric, graphic and dynamic EQ
Parametric EQ gives you adjustable frequency, gain and bandwidth. It is a practical starting point for both broad tone changes and precise corrections.
Graphic EQ has gain sliders at fixed frequency centres. It offers less freedom to place individual bands, but provides a quick view of the adjustments across the spectrum.
Dynamic EQ varies a band's gain in response to a detector signal's level. For example, it can reduce a harsh vocal range more strongly on loud phrases and ease off elsewhere. Depending on the processor, a band may boost or cut, and its detector may listen to the track itself or an external signal.[4]
These terms describe different features. An EQ can be parametric and dynamic at the same time.
Common EQ mistakes
High-pass filtering every track by habit. A filter can remove useful body as well as rumble. Use it where the low-frequency content is unwanted, then check that the sound still has the weight you need.
Treating frequency charts as instructions. A range described as “muddy” in one recording may supply warmth in another. Use charts to guide your search, then judge the result by ear.
Correcting every visible peak. Notes and harmonics naturally produce peaks in a spectrum. A peak does not establish that something sounds wrong.
Adding bands without checking earlier moves. If the result becomes thin or unnatural, bypass the EQ and reconsider the adjustments. Several bands are not automatically excessive; each should serve a purpose.
What EQ cannot tell you or fix
EQ cannot reliably restore missing detail or undo severe clipping. It may reduce the prominence of a recording problem, but a new recording can be the better solution.
On a stereo mix, an EQ band affects every source with energy in that range. A cut intended to reduce guitar harshness may also soften the vocal or snare. Where possible, correct the individual track if that is where the problem lies.
A spectrum display can show the frequency balance, but it cannot decide whether that balance suits the song. When you review a Sonalix report, treat a flagged range as a place to listen more closely. Check the relevant tracks, make an adjustment, then compare the result at similar loudness.
Sources
- Ableton Live manual: EQ Eight, parametric EQ controls and filter behaviour.
- FabFilter Pro-Q help: Band controls, filter shapes, slope and Q conventions.
- iZotope: EQ tips, when to boost and when to cut, corrective and tonal uses of EQ.
- FabFilter Pro-Q help: Dynamic EQ, level-dependent band gain and detector options.