Skip to content

Loudness targets by genre

Send feedback

Last updated 3 min readTags:MasteringDelivery

Find a mastering loudness for your track. Measure three reference tracks, compare their LUFS and true peaks, then listen at matched loudness.

There’s no fixed LUFS target for any music genre. If you’re choosing a mastering level, measure three released tracks with a similar arrangement and sound. Use their readings as a starting point, then listen to what changes as you make your own master louder.

Why loudness varies within a genre

A track with sustained synths and layered vocals can be louder overall than a sparse track with sharply peaked drums, even when both have the same maximum true peak. Sustained sounds keep the level up between hits. An exposed snare can produce a high peak in a passage that otherwise sounds quiet.

That’s why a sparse pop ballad is usually a better reference for your ballad than a dense pop single. Pick tracks with a similar amount of sustained sound and a similar contrast between sections.

How to choose a loudness for your master

  1. Pick three released tracks. Choose masters you like the sound of. Check which release you have. An original master and a later remaster can measure quite differently.
  2. Measure each full track. Use a lossless file where possible. Import it at unity gain (0 dB) and bypass any processing or loudness normalisation on the reference path. Reset your loudness meter between tracks. Record integrated LUFS and maximum true peak in dBTP.
  3. Try the middle reading first. In the example below, that’s −11 LUFS. If one reference is much louder and the arrangement is substantially different, give more weight to the tracks that sound closer to yours.
  4. Compare at matched loudness. Turn down the louder file with a gain control after any processing. Compare similar sections, such as chorus with chorus, and fine-tune the level by ear. Try the same comparison between two versions of your own master. If the louder version makes the snare sound dull or the bass audibly distort, ease off the limiter and listen again.

These figures are illustrative. They show how to read your own measurements.

Reference Integrated loudness (LUFS) Maximum true peak (dBTP) PLR (dB)
A −13 −1.0 12
B −11 −1.0 10
C −9 −1.0 8

Peak-to-loudness ratio (PLR) is the difference between maximum true peak and integrated loudness. For reference B, −1 minus −11 gives a PLR of 10 dB. A low PLR tells you the highest peak is closer to the track’s overall loudness. Arrangement, compression and limiting can all affect that reading. To check how much the limiter changed your master, compare its input and output at matched loudness.

What streaming normalisation changes

On Spotify’s Normal setting, when tracks are normalised individually, a −9 LUFS master is turned down by about 5 dB and a −11 LUFS master by about 3 dB. Both play at roughly −14 LUFS. If extra limiting softened the drum hits on the louder master, playback gain won’t bring back the attack. See Spotify’s playback settings and how loudness normalisation works.

    Type to search titles, headings and summaries.