Skip to content

Why is my low end boomy?

Send feedback

Last updated 2 min readTags:TroubleshootingMixing

Find out whether a bass note is booming in the mix or in the room, then check the kick and bass together.

When one bass note jumps out or the kick hangs over the next beat, listen to the same passage on headphones and move your head away from the usual seat. Those two checks often tell you where to start.

If the boom changes with your position

A room mode is a resonance related to the room's dimensions. At the affected frequencies, standing waves can make the same note loud at one seat and weak a short distance away. Play a slow bass sweep or loop the offending note, then move forwards and back. Compare with headphones and another system.

If the note is even elsewhere, try moving the listening position or monitors. Bass trapping can damp the resonance, though low-frequency absorbers need considerable depth. Monitor EQ can improve the response at the measuring position. Check other seats before relying on it. See home studio acoustics.

If the same note booms on headphones

Solo the bass and loop that note and the two around it. If the same pitch jumps out, check the patch's filter resonance or the instrument's decay. A narrow cut may work on a constant peak. Try dynamic EQ if it only swells on some notes. See finding and reducing resonances.

If the kick and bass sound even alone, play them together and mute each in turn. Listen for overlap on the hit and through the kick's tail. Shorten the tail first if it is masking the bass line. If the conflict remains, decide which part needs the deepest energy and try a small EQ move, a high-pass filter on a third source carrying rumble, or brief sidechain reduction. See kick and bass. If the balance changes specifically when the low end is summed, check mono bass separately.

Check the change at a steady level

Below about 100 Hz, equal-loudness contours can require up to 24 dB more level per octave towards lower frequencies for tones to sound equally loud. Use a familiar playback level and a spectrum analyser to support what you hear. A strong low note can also mask higher material. If several sources are obscuring each other higher up, try the muddy-mix checks. If the room and headphones still tell different stories, see mix translation and bass on small speakers.

Was this page helpful?

    Type to search titles, headings and summaries.