Mastering for Spotify
Last updated 3 min readTags:MasteringDelivery
Learn what Spotify's −14 LUFS playback reference means, how much true-peak headroom to leave and what to check before you send your master.
Spotify recommends −14 LUFS integrated and a maximum true peak below −1 dBTP. If your master is louder than −14 LUFS, Spotify recommends keeping true peaks below −2 dBTP to reduce the risk of distortion during lossy encoding. These are mastering recommendations. Choose the loudness that suits the track. Spotify for Artists’ mastering guidance
What Spotify does at playback
Spotify measures integrated loudness during upload and applies gain during playback where loudness normalisation is available and enabled. The Normal setting uses −14 LUFS as its reference.
| Master | Gain on Normal, with track-level normalisation | Integrated loudness after gain |
|---|---|---|
| −8 LUFS | −6 dB | −14 LUFS |
| −14 LUFS | 0 dB | −14 LUFS |
| −20 LUFS with a true peak of −5 dBTP | +4 dB | −16 LUFS |
In the quiet example, a 6 dB boost would bring the true peak to +1 dBTP. Spotify adds only 4 dB to leave 1 dB of peak headroom for lossy playback.
- Loud and Quiet. Premium listeners can also choose Loud (−11 LUFS) or Quiet (−19 LUFS). Loud uses a playback limiter when needed, so the peaks on a quiet, dynamic track can sound different on that setting.
- Albums and playlists. Spotify applies the same gain to every track when it normalises an album as a whole. A quiet opener stays quiet relative to the rest of the album. If someone shuffles the album or hears the opener in a playlist with tracks from other albums, Spotify adjusts it individually.
- Devices and formats. Normalisation applies to both lossy and lossless streams on supported devices. Spotify says the web player and some third-party devices play without it.
Spotify for Artists’ playback guidance
What to check before you deliver
- Compare masters at the same loudness. If you have a louder version, turn it down to match the other one. Listen to the kick and snare in the busiest section. If they lose impact in the louder master once the levels match, try less limiting.
- Measure the whole export. Scan the finished file for integrated loudness and maximum true peak. If the master already sounds right and the peaks are too high, try a small output trim and measure the new export.
- Preview a lossy encode. Use an AAC or Ogg Vorbis preview if you have one. Peaks can rise after decoding, so check the preview for clipping and compare it with the lossless export at matched loudness. Listen for new crackle on sharp hits or a rough edge on cymbals. If the preview clips, leave more peak headroom and check again. Your local preview gives you an estimate of how the master handles lossy encoding.
What to send your distributor
Send one lossless stereo master per track. Spotify prefers FLAC and accepts PCM WAV. Its delivery guidance calls for a native sample rate of 44.1 kHz or higher and 24-bit audio if that’s how the master was made. Use 16-bit if that’s the highest-resolution master available. Check which formats your distributor accepts. Spotify prepares its lossy and lossless streams from the same master. Spotify for Artists’ file specifications