Streaming loudness targets for Spotify, Apple Music and YouTube
Last updated 3 min readTags:MasteringDelivery
See which streaming loudness targets are published, how Spotify adjusts tracks in playback, and how to choose and check your master level.
Spotify uses −14 LUFS for its Normal playback setting and recommends it as a mastering target. You can release a master at a different level if it sounds better in a level-matched comparison. Spotify adjusts its playback volume where normalisation is active. Spotify for Artists
Playback levels and mastering guidance by platform
| Platform | Playback normalisation | Mastering guidance |
|---|---|---|
| Spotify | Normal −14 LUFS. Premium listeners can also select Loud (−11 LUFS) or Quiet (−19 LUFS). | Spotify recommends −14 LUFS integrated and true peaks below −1 dBTP. For a master louder than −14 LUFS, it recommends peaks below −2 dBTP. |
| Apple Music | Sound Check adjusts playback loudness. Apple’s Sound Check guidance gives no LUFS reference. | Apple’s Digital Masters brief recommends at least 1 dB of headroom to reduce the risk of clipping. |
| YouTube | Independent measurements have found a playback reference of around −14 LUFS. | YouTube’s upload encoding guide gives no LUFS target. |
Spotify loudness guidance · Apple Sound Check · Apple Digital Masters brief · YouTube playback measurements · YouTube upload guidance
YouTube’s Stable volume is a separate feature. It adjusts the volume throughout a video to reduce the difference between quiet and loud sections. YouTube says it is off for YouTube Music and official music videos. YouTube Help
What Spotify does to a master
Loudness normalisation adjusts gain during playback. A fixed gain change turns every part of the track up or down by the same amount. The table shows what happens when Spotify normalises tracks individually on Normal. The LUFS figures describe integrated loudness, measured across the whole track.
| Master loudness | Master true peak | Gain applied | Playback loudness |
|---|---|---|---|
| −8 LUFS | −2.2 dBTP | −6 dB | −14 LUFS |
| −13 LUFS | −2.2 dBTP | −1 dB | −14 LUFS |
| −20 LUFS | −5 dBTP | +4 dB | −16 LUFS |
The first two masters reach the same measured loudness. They can still sound different. If you used more limiting on the −8 LUFS version, listen to whether the kick and snare have lost some of their attack. The third master gets only 4 dB of gain because Spotify leaves 1 dB of peak headroom when it raises quiet tracks on Normal. The Loud setting can use a playback limiter. Spotify for Artists
Spotify applies the same gain to every track when you play an album in order. In playlists and on shuffle, it can adjust each track individually. Apple’s Sound Check can also adjust gain per album. Spotify says its web player and some third-party devices skip normalisation. Spotify for Artists · Apple Digital Masters brief
How to choose and check your master level
- Compare at matched loudness. Make a version with less limiting and turn the louder version down for the comparison. Listen to the same chorus in both. Check the drum attack, whether the vocal stays clear and whether the bass distorts. Compare with a couple of reference tracks in a similar style, also at matched loudness.
- Leave room for encoding. Check your distributor’s delivery guidance and set a true-peak ceiling. A lossy encode can produce higher peaks than the source file, so preview it if your tools support it. Apple Digital Masters brief
- Measure the exported file. Run a BS.1770 meter over the whole file and check integrated LUFS and maximum true peak. Listen to the export before you send it.