Mastering for YouTube
Last updated 3 min readTags:MasteringDelivery
Does YouTube need a −14 LUFS master? Learn how to leave true-peak headroom, check an unlisted upload and read Stats for nerds.
Master the track at the level that suits the music. Leave some true-peak headroom and use an unlisted upload to hear how the finished video plays on YouTube. If extra limiting takes the snap out of the snare or makes the bass distort, those changes will still be audible when YouTube turns the track down.
Should you master to −14 LUFS for YouTube?
Mastering engineer Ian Shepherd has measured a playback reference of about −14 LUFS on YouTube's video player. In his tests, the player turned down audio above its reference and left quieter audio at its original gain. Treat −14 LUFS as a reported playback level. YouTube's upload guidance gives encoding settings without a LUFS requirement. Production Advice · YouTube upload troubleshooting
Playback normalisation applies a fixed gain across the video. YouTube's Stable volume varies the gain during playback to reduce the difference between quiet and loud passages. YouTube says Stable volume is on by default where available and is off for official music videos and YouTube Music. YouTube Help on Stable volume
Prepare the audio and test the upload
- Measure the master. Check integrated LUFS and maximum true peak across the full export. A ceiling of −1 dBTP is a sensible starting point. Decoded peaks can rise after lossy encoding, and some files need more headroom. AES streaming audio guidance
- Check the video export. For a music or lyric video, preserve the master level in the video editor. If the video includes dialogue or voiceover, set the music level so the words stay clear, then check the full soundtrack.
- Upload the finished video as Unlisted. Anyone with the link can watch or share it. Open the processed upload on a computer. In the player settings, switch off Stable volume and Voice boost if those controls are available. YouTube visibility settings · YouTube playback settings
Read Stats for nerds
Set the YouTube player's volume to 100%. Right-click the video, select Stats for nerds and look for Volume / Normalized. The first percentage is the slider setting. The second shows the playback gain as a percentage at that slider setting. Content loudness, in dB, is YouTube's estimate of how far the video sits above or below its reference. YouTube Help on Stats for nerds · Production Advice on the readout
| Example at 100% player volume | What the readout tells you |
|---|---|
100% / 63% with content loudness of +4 dB |
YouTube is applying roughly 4 dB of attenuation. |
100% / 100% with content loudness of −3 dB |
YouTube measured the video 3 dB below its reference. The player applies no gain increase in this example. |
| Content loudness is missing | The panel gives you too little information to infer the adjustment. Check again after processing. |
Listen before you publish
Leave the player at 100% on your upload and a similar release if you want to hear their relative playback levels. To judge sound quality, compare the same passage in your upload and local video export. Adjust one until they sound equally loud, then listen for new distortion on bass notes, roughness on cymbals or changes to drum attacks. If you hear distortion only in the upload, try lowering the final output gain slightly, then export and check again.